「Adjusting a Storm Door Closer7868008」の版間の差分
(ページの作成:「Make a easy closer adjustment to maintain your storm door from banging shut, or remaining open when you lower or increase the glass panel for winter or summer time. Seas...」)
2019年7月4日 (木) 11:47時点における最新版
Make a easy closer adjustment to maintain your storm door from banging shut, or remaining open when you lower or increase the glass panel for winter or summer time.
Make changes to your pneumatic screen door closer (storm door closer) twice a year when you exchange the screens and glass storm panels. Move the lengthy connecting pin into the forward hole (for winter) or rear hole (for springtime) of the closer every time you alter the storms or screens. If necessary, adjust the stress control screw on the closer as nicely.
The subsequent time you readjust the screens and glass storm panels in your self-storing combo storm door, don’t neglect to alter the location of the long pin connecting the door bracket with the door closer tube (photo). When the glass storm panels are down, location the connecting pin in the front hole of the closer tube (closest to the door bracket). This increases the closing pressure on the door in the final few inches of travel to make sure that the door latch snaps into the catch. When the screens are down, location the connecting pin in the rear hole of the closer tube (farthest from the door bracket). Now, instead of slamming shut, the door will slow down as it nears the door catch. To increase or reduce the stress exerted by the door closer, flip the screw controlling the bypass valve in the closer tube. Refer to the instructions on the pneumatic display door closer label.